Scene Switch

One button, one tap, everything changes. MOES scene switches are wireless Zigbee buttons you place anywhere in the room, no wiring, no drilling. Press once to turn on the lights, press again to activate movie mode, hold to turn everything off. Program each button action in the Tuya Smart Life app to trigger any scene or device in your home.

Scene Switches: One Button That Controls Your Whole Home

The problem with smart home apps is that you still have to pick up your phone. A MOES scene switch solves that. It is a wireless Zigbee button that sticks to any surface, sits on any table, or mounts on any wall without any wiring. Each press, double press, or long hold can trigger a completely different scene, controlling lights, curtains, sockets, and any other Tuya-compatible device in your home simultaneously.

What Makes Scene Switches Different from Regular Smart Switches

A regular smart switch replaces a wall switch and controls the light it is wired to. A scene switch is not wired to anything. It is a portable, battery-powered button that you can place anywhere and program to trigger any combination of actions across any devices in your home. You can have one by the sofa to control the living room, one on the bedside table to turn everything off at night, and one by the front door to activate a leaving-home scene that turns off all lights, closes the curtains, and arms the sensors in one tap.

Scene Ideas to Get You Started

Good morning scene: Single press opens the bedroom curtains, turns on the bathroom light at 50%, and starts the coffee maker via a smart socket.

Movie mode: Double press dims the living room lights to 20%, closes the curtains, and turns off the hallway light.

Leaving home: Long press turns off all lights, closes all curtains, activates the door and window sensors, and cuts power to non-essential sockets.

Bedtime: Single press in the bedroom turns off all lights except a dim bedside lamp, closes the bedroom curtains, and sets the thermostat to night mode.

All of these are configured once in the Tuya Smart Life app and then triggered with a single physical button press, no phone required.

FAQs About MOES Scene Switches

No. MOES scene switches are completely wireless and battery powered. There is no wiring involved at all. You attach the switch to a surface using the included adhesive pad or magnetic mount, pair it with your Zigbee gateway in the Tuya Smart Life app, and it is ready to use. You can move it to a different location at any time without leaving any permanent marks.

Yes. A scene in the Tuya Smart Life app can include any number of devices across any rooms in your home. A single button press can simultaneously turn off lights in the living room, close curtains in the bedroom, cut power to sockets in the kitchen, and activate sensors throughout the house. There is no limit to how many devices a single scene can control.

Yes. MOES scene switches use the Zigbee protocol and require a compatible Zigbee gateway to connect to the Tuya Smart Life app and trigger scenes. If you do not already have a gateway, you will need to add a MOES Zigbee gateway to your setup. Once the gateway is in place, the scene switch pairs quickly and all scene programming is done in the app.

Most MOES scene switches support three distinct trigger types per button: single press, double press, and long hold. Each trigger type can be assigned to a completely different scene. A four-button scene switch therefore gives you up to twelve independently programmable actions from a single device. The exact number of triggers available depends on the specific model, so check the product page for details.

Most MOES scene switches run on a standard CR2032 coin cell battery, which typically lasts 12 to 24 months depending on how frequently the button is pressed. The battery is easy to replace by opening the back of the switch. The Tuya Smart Life app will notify you when the battery level is low so you are not caught off guard.

+ View more